924Board.org

Just an update got the wing removed today it was nothibg other than the heavy underseal on the arch side of the wing holding it, gave it a few runs through with a stanley knife and it fell off so all ...

Thanks for your one arm typing efforts Mike

somebody has suggested running a fishing line/wire to relase the mastic and this also checks for bolts although Im pretty sure I have all the bolts out w ...

I got the one at the tip Mike, I have the valance and badge panel removed its just the small flange that runs along the headlight thats not budging.

cheers

Gary

So I have removed all the top screws the three back ones ,the single one at the tip that joins to the badge panel and the majority of the wing is free and loose however the small flange that runs alon ...

Hi I am not far from you just south of Perth,got some good pictures and advice here

https://porsche924.co.uk/forum/viewtopic.php?f=113&t=30080

will give it a go next weekend.

cheers
...

So no help with removing the windscreen trim ?

So a couple of questions how do you remove the trim pieces round the windshield ? and anyone have any pictures of the later 944 screen fitted there is a thread in the body section but all the pictures ...

ok so had to get a pair of flag mirrors for the 924s however the wiring loom in the mirrors is different from whats in the door on the mirror I have the following 6 wires

brown
black/brown
white ...

Would an 8" x 16 teledial et 52.3 fit on the front of a 924s ? I have seen a set for sale (4) ideally wanting a 7 on the front however would go for the 4 8`s if they fit

any advice appreciated ...

Is Porsche the only source for these sensors 94460620100 ? seem expsensive for what they are at £50 or does anyone know a Bosch equivelant

Water Temp sensor

So I take it its not a popular mod then

Has anyone any experience of these flywheels tempted to fit one while I have the engine out however have read mixed reviews having problems setting the crank sensor and starting problems.

any advic ...

Thank you sir very helpful, I have a new speedo to fit as well so hopefully will get this sorted at the same time.

cheers

Gaz

Can anyone give me some pointers for testing the rev counter which is not working in my car .Does it take a signal from the coil (Green Wire?) which I suppose the only check is a continuity check ?. I ...