924Board.org

Currently running Yokohama A052. 225/50/16 front and 245/45/16 rear on BBS RS 7"/8" with a 49mm offset. 16mm spacer on the rear. Fronts rubbed a bit so had to pull the front fenders slightly ...

I had similar pieces in my oil once I started to drive my 924 more and do some auto-x my 924. My car sat for a long time before I got it. Doesn't smoke on start up and doesn't burn much oil. I believe ...

I just replaced mine last year or the year before that. It was difficult to find. I eventually bought one from Rockauto that was a remanufactured unit. It works nicely however when they reassembled th ...

My 1980 924 had the 5 lug hubs, 944 NA brakes and upgraded suspension but I dont think it has an LSD....at least it doesnt act that way on the track. It didnt have the option tag by the tail light so ...

Wow what a build!!! That is a lot of really good fabrication.

Did you use the 1978 chassis for the build? I think I read that....if so how tricky was converting the chassis to a hydraulic clutch? I ...

We bought an aluminum radiator from Alibaba iirc for our chumpcar 944. The welds were surprisingly good. One of the main inlet or outlet pipes was slightly undersized compared to the original radiator ...

We replaced all the brake lines on our 944 chumpcar with pre-made Cupronickle lines from canadian tire. The overall lengths were not exactly the same as stock but a couple extra bends took up the slac ...

Looks like a 924S or 944 tub since the rear side window was different on the 968.

944 had a fuse box under the hood. I dont see one in the pics so I think its a 924S.

Hood and nose/header pane ...

I am in the same situation. I have rebuilt an engine with NOS euro pistons (9.3:1), bearings from Ideola, everything balanced and a refreshed head. The extra power was barely noticeable. I also spent ...

Changed the booster with a remanufactured ATE unit. Fixed the low soft pedal. I dont understand why. Everything I have read about a low sinking brake pedal points to other issues. Even the little trou ...

New master cylinder was bench bled and installed. Also installed a new booster check valve. Pedal still feels the same.

Inspected every inch of brake line on the chassis. Some of it you cant see bu ...

Found a used Willwood Rennbay big brake kit for a good price. Installed the front calipers and new stainless steel lines. Brake pedal was still low and would sink with constant medium applied brake pe ...

I have my '79 block that I could measure. The block was align honed when I rebuilt it. Not sure if that makes a difference. I only have calipers to measure. Would that be accurate enough?

The front right bleeder screw is still leaking after replacing it with new. Took the bleeder out and looked in the threaded hole. There is a bit of corrosion on the threads and seating surface. I tire ...

Yes, I forgot to mention I lubricated the front calipers when I took them off and sanded/lubed the pins. I will do the back as well. I have some Permatex high temp brake grease I will use.

After th ...